A urine concentration test measures the ability of the kidneys to conserve or excrete water.
How the Test is Performed
For this test, the specific gravity of urine, urine electrolytes, and/or urine osmolality are measured before and after one or more of the following:
- Water loading. Drinking large amounts of water or receiving fluids through a vein.
- Water deprivation. Not drinking fluids for a certain amount of time.
- ADH administration. Receiving antidiuretic hormone (ADH), which should cause the urine to become concentrated.
After you provide a urine sample, it is tested right away. For urine specific gravity, the health care provider uses a dipstick made with a color-sensitive pad. The dipstick color changes and tells the provider the specific gravity of your urine. The dipstick test gives only a rough result. For a more accurate specific gravity result or measurement of urine electrolytes or osmolality, your provider will send your urine sample to a lab.
If needed, your provider will ask you to collect your urine at home over 24 hours. Your provider will tell you how to do this. Follow instructions exactly.
How to Prepare for the Test
Eat your normal diet for several days before the test. Your provider will give you instructions for water loading or water deprivation.
Your provider will ask you to temporarily stop any medicines that may affect the test results. Be sure to tell your provider about all the medicines you take, including dextran and sucrose. DO NOT stop taking any medicine before talking to your provider.
Also tell your provider if you recently received intravenous dye (contrast medium) for an imaging test such as a CT or MRI scan. The dye can also affect test results.
How the Test will Feel
The test involves only normal urination. There is no discomfort.
Why the Test is Performed
This test is most often done if your doctor suspects central diabetes insipidus. The test can help tell that disease from nephrogenic diabetes insipidus.
This test may also be done if you have signs of syndrome of inappropriate ADH (SIADH).
In general, normal values for specific gravity are as follows:
- 1.005 to 1.030 (normal specific gravity)
- 1.001 after drinking excessive amounts of water
- More than 1.030 after avoiding fluids
- Concentrated after receiving ADH
Normal value ranges may vary slightly among different laboratories. Some labs use different measurements or test different samples. Talk to your provider about the meaning of your specific test results.
What Abnormal Results Mean
Increased urine concentration may be due to conditions, such as:
- Glucose (a type of sugar) in the urine
- Heart failure
- Loss of body fluids (dehydration) from diarrhea or excessive sweating
- Narrowing of the kidney artery (renal arterial stenosis)
- Syndrome of inappropriate antidiuretic hormone secretion (SIADH)
Decreased urine concentration may indicate:
- Diabetes insipidus
- Drinking too much fluid
- Kidney failure (loss of ability to reabsorb water)
- Severe kidney infection (pyelonephritis)
There are no risks with this test.
Water loading test; Water deprivation test
Fogazzi GB, Garigali G. Urinalysis. In: Feehally J, Floege J, Tonelli M, Johnson RJ, eds. Comprehensive Clinical Nephrology. 6th ed. Philadelphia, PA: Elsevier; 2019:chap 4.
Riley RS, McPherson RA. Basic examination of urine. In: McPherson RA, Pincus MR, eds. Henry's Clinical Diagnosis and Management by Laboratory Methods. 24th ed. Philadelphia, PA: Elsevier; 2022:chap 29.
Review Date 7/21/2021
Updated by: David C. Dugdale, III, MD, Professor of Medicine, Division of General Medicine, Department of Medicine, University of Washington School of Medicine. Also reviewed by David Zieve, MD, MHA, Medical Director, Brenda Conaway, Editorial Director, and the A.D.A.M. Editorial team.